With over 50 primers; including Water-reducible, Zinc, Chromate, High Solids, Low VOC; TCI-Coatings has a primer for every industry requirement.

P-501 Red Oxide, Zinc Chromate Primer

This is a rust inhibiting primer formulated for priming both interior and exterior iron or steel and is not recommended for use as a finish coat. This product is free of any lead pigments or drier.

For shop coating or field priming structural and miscellaneous steel. Intended for brush or spray application. Meets performance requirements of SSPC Paint #25.

VOC 3.55 lb./gallon
Lead free

P-523 Fast Dry Zinc Chromate

This fast dry universal primer is formulated for use over aluminum or steel. It has exceptional hiding power and performs best over clean surfaces. This product is free of any lead pigments or drier.

For use wherever a fast dry primer is needed for industrial product finishing and refinishing.

VOC 4.53 lb./gallon
Lead free

P-522 Fast Dry Black

This fast dry universal primer is formulated for use over aluminum or steel. It has exceptional hiding power and performs best over clean surfaces. This product is free of any lead pigments or driers.

For use wherever a fast dry primer is needed for industrial product finishing and refinishing. It is excellent for wrought iron fencing and furniture.

VOC 5.09 lb./gallon
Lead free

Back to top

High Solids Low VOC Primers

These products are designed as fast dry, low VOC primers for miscellaneous steel. Lead and chromate free corrosion inhibitors and high solids content keep these products within current regulatory guidelines.

For use wherever a fast dry primer is needed for industrial product finishing and refinishing. These products are a suitable performance alternate to federal specification TT-P-636 and TT-P-645.

No lead or chromate hazards
P-569 red: VOC 2.9 lb./gallon
P-581 white: VOC 3.2 lb./gallon
P-583 gray: VOC 3.5 lb./gallon

Back to top

LCE-1009 Economical High Build Epoxy Primer

A high performance, semi-gloss epoxy primer designed to cure at ambient temperatures and exhibit excellent resistance properties to a wide variety of chemicals and corrosives. Has excellent adhesion, sag resistance and corrosion resistance.

Designed for use on airport runway systems, steel tanks, trailers, miscellaneous steel and concrete. Resists petroleum products (crude, sour crude, diesel fuel, hydraulic fluids, etc.), brine and other salt solutions, detergents and lubricants. Shows excellent holdout for 2K urethane products.

VOC less than 2.48 lb./gallon (mixed)

TS-140 Tec-Seal Epoxy Primer

This modified epoxy-polyamide primer is designed for the protection of steel, galvanized steel and aluminum substrates. It features fast dry and recoat, and good sandability along with excellent corrosion resistance. Its unlimited recoat window allows for priming and storing parts for later top coating.

Ideally suited for fleet, OEM, or general industrial applications. This primer is designed to be an undercoat for two-component urethanes.

VOC 4.55 lb./gallon (mixed)

Back to top