TCI-Coatings provides specialty coatings such as High Heat, Acrylic Lacquers, custom Metallics and Camouflage, just to name a few.

T-LAC Acrylic Lacquers

These fast drying, mar resistant, acrylic lacquers provide excellent adhesion to automotive plastics.

Primarily designed for after-market interior automotive parts

Not applicable for automobile interiors. May use AEP-8989 over metal.

VOC 5.5-6.0 lb./gallon
Lead and mercury free

Silicone High-Heat Aluminum

This single- component, high heat resistant coating contains metallic aluminum and requires heat curing to obtain maximum stability and durability.

It is intended for use on exterior and interior clean metal surfaces such as boilers, pipes, stacks, engines and exhaust manifolds that are exposed to temperatures ranging between 600° and 1,000° F.

This product is not designed as an air-dry coating. Do not apply to heated surfaces that are over 1,200° F.

VOC 4.85 lb./gallon

Back to top

High-Heat Black Enamel

This modified-silicone product can be used for both interior and exterior applications where temperatures range between 200° and 1,000°F.

Recommended for use on fire tubes, boiler tubes, drying ovens, smoke stacks, engines, exhaust manifolds and 55 gallon drums subjected to high heat and corrosive chemicals.

VOC 4.99 lb./gallon
Lead and chromate free

100% Acrylic Latex Int./Ext. Coating

A low-sheen, blister, fume and mildew resistant paint film for application on exterior wood, masonry, cement-asbestos and primed metal. Meets federal specification TT-P-19D.

May be used on all properly prepared surfaces for which a low sheen latex finish is appropriate.

VOC 0.99 lb./gallon

Back to top